Has anybody seen the SG 90 engine that will be released next season. I hear there are pictures on the web - I cannot find any?
SG Engine Pictures
| Author | Comment | ||
|---|---|---|---|
 toadtoad |
SG Engine Pictures |
Lead | |
|
Posts: 6 (08/31/08 05:47:08) |
|
||
|
gbeg1 |
|||
|
Posts: 59 (08/31/08 07:02:19) |
Me, me, me... I have
Not sure if there are pictures on the web though. You could try a search on International Waters forum?! I think it will be very good!! Regards,
|
||
|
HendricX |
|||
|
Posts: 32 (08/31/08 09:13:36) |
IF they are one the web ... it could be on the Ondalunga forum.
Did a search overthere .. could not find it. They are not on Int.Waters. But if Leon puts them on the LMracing-site .. we all can see them . ;-)
Last Edited By: HendricX
08/31/08 09:16:51.
Edited 1 times.
|
||
|
alan whitaker |
|||
|
Posts: 177 (08/31/08 09:46:06) |
|
||
|
gbeg1 |
|||
|
Posts: 60 (08/31/08 09:46:40) |
Regards,
|
||
|
Fredde Cederberg |
|||
|
Posts: 361 (08/31/08 12:17:47) |
Me too....
|
||
|
HendricX |
|||
|
Posts: 33 (08/31/08 12:17:49) |
And you didn't take pictures of it ?
Shame on you :-) |
||
|
gbeg1 |
|||
|
Posts: 61 (08/31/08 12:34:47) |
I was frisked and then strip searched.
They didn't find it but unfortnatley it was not in an easily accessible hiding place 
Regards,
|
||
 Dave Marles |
|||
|
Posts: 843 (08/31/08 14:43:26) |
Is this it?
http://rcracingboats.yuku.com/topic/395
Dave
Tuning software |
||
|
toadtoad |
SG90 Pictures | ||
|
Posts: 7 (09/01/08 03:55:43) |
Thanks for the link Dave. - Looks like it has been coming for sometime as the discussions were dated last year!
Leon - Did you see what sort of Crank set up and induction system it was using? Dave H. |
||
|
gbeg1 |
|||
|
Posts: 62 (09/01/08 04:12:00) |
Crank is similar to CMB as all the dimensions allow for it to drop straight into engine mounts and shaft/coupling setup for a cmb. I wasn't allowed to take it apart unfortunatley and my Italian is not all that good!! Reed valve.
Regards,
Last Edited By: gbeg1
09/01/08 04:15:28.
Edited 1 times.
|
||
|
SOLLING |
|||
|
Posts: 17 (09/01/08 06:12:47) |
The info. I have so far is that it will use carbon reed valve, Leon is correct the engine will be sized as a direct replacement for the CMB. The carb will be
made by another manufacturer, not sure about the pipe but they will be hard pressed to produce a pipe better than PMC
Ivan will be in charge of producing this engine and when he returns from holiday his sole job is to produce these engines. |
||
|
ian folkson |
|||
|
Posts: 75 (09/01/08 12:54:49) |
Link to photos from the world champs hydro and offshore if you look carefully in the batterie H/O there is someone holding the engine.
Looks like a CMB carb to me!!! http://www.amatorialimage...cegallery/boat/index.html |
||
|
gbeg1 |
|||
|
Posts: 63 (09/01/08 13:49:26) |
Yes it is at the moment but as Steve has said a new one will be manufactured. Can only be a good thing!!
Regards,
|
||
|
Seb Videmont |
|||
|
Posts: 10 (09/04/08 01:55:24) |
Here is a picture of the Ivan's Boat. Stuttgart 2007. Fast, nice sound, but not in the final. But it was the first official international race for this
engine.
Seb V |
||
|
Seb Videmont |
|||
|
Posts: 11 (09/04/08 02:02:25) |
|
||
Nice try but i have seen it in the flesh not on photograph.
