| Author | Comment | ||
|---|---|---|---|
 ericwires |
fuel oil |
Lead | |
|
Posts: 28 (05/28/09 13:53:56) |
hi..
i'm thinking of using 15% Klotz oil (90%thechniplate + 10% benol)+25% nitro do you suggest this ?? Or can you please tell me what you suggest? thanks
Last Edited By: ericwires 05/31/09 10:19:10.
Edited 1 time.
|
||
|
HendricX |
|||
|
Posts: 66 (06/02/09 13:35:36) |
18 to 20% is more like it.
|
||
|
ericwires |
|||
|
Posts: 29 (06/03/09 01:44:33) |
do you mean 18% of 90% thechniplate + 10 benol ? i was looking around in websites to get an idea i sow the model thecnics fuel and some of their products do
not use castor oil at all,, just synthetic oil. is that good for marine motors. www.boyztoysracing.co.uk/index.php?subj=readtopic&id=14...because i was
thinking of using this fuel. but i believe that with some castor oil will be better.
|
||
|
Fredde Cederberg |
|||
|
Posts: 397 (06/04/09 02:53:36) |
I use 10% synthetic oil and 5% castor oil.
18-20% is to much in my opinion. |
||
|
henvis |
|||
|
Posts: 59 (06/04/09 06:03:24) |
Castor oil rescues the motor at an overheat... It is especially important for models off-road and heli. But a smoke and soot...
 
Last Edited By: henvis
06/04/09 06:06:44.
Edited 1 times.
|
||
 Dave Marles |
|||
|
Posts: 914 (06/06/09 22:34:56) |
I wouldn't use just 15% Klotz techniplate in a 90/91 motor. In my experience that oil is good for power but not for lubrication.
Dave
Tuning software
Last Edited By: Dave Marles
06/07/09 00:59:58.
Edited 1 times.
|
||
|
ericwires |
|||
|
Posts: 30 (06/07/09 03:20:59) |
if i use 18% oil will do? but 90% synth + 10% castor or 95% synth +5% castor is it ok for lubrication?can you please tell me which is best oil mix (synth +
castor) for picco90 and cmb91
Last Edited By: ericwires
06/07/09 03:53:15.
Edited 2 times.
|
||
|
henvis |
|||
|
Posts: 61 (06/09/09 21:41:39) |
My motor (by mistake) worked five minutes only with pure metanol in fuel tank! Absolutely new engine (OPS 3,5) worked perfectly and any smoke from an exhaust!
I have quickly opened the motor... Inside all was perfect! After that case the motor worked still for a long time.
Therefore I think that 10-12 % of oil enough. If your motor does not heat up to 160 degrees on Celsius, I think that castor oil too not necessarily to use. From it the motor and an exhaust inside happen dirty
|
||
