NEW AXE ROSSI .90-2009

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (HendricX) — Tue, 17 Mar 2009 16:27:34 GMT

Yes .. I've got five of them ... including Dave's one :-)

Had some laser-cut disk's out of springsteel made , instead of the fiberdisk's.

Not run on nitro (yet) because the GBS is my test-engine for petrol-conversion .

The idea for a reed-engine came up while "refurbishing" my hobby-room,
and found the Begonzoni reed engine...

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (Dave Marles) — Tue, 17 Mar 2009 03:06:19 GMT

Gaasbeck from Holland made some .90 engines GBS. Very similar to OPS 90. I think Henk has them all now.

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (BoBoKwok) — Tue, 17 Mar 2009 00:57:17 GMT

What is GBS?

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (HendricX) — Sun, 15 Mar 2009 16:39:25 GMT

How about this exercise ?

CMB-crank , GBS-cylinder , Tillotson carb.

As you can see , it's side exhaust ... Why ????
Because I believe in spreading the power liniar to the crank.
Makes live easier for the piston too.

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (KEITH BURGESS) — Sun, 15 Mar 2009 03:35:20 GMT

How about this one then ??? Sorry no details yet.

http://ne-stuff.blogspot.com/2009/02/scoop-deml-marine-engines.html

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (uros) — Thu, 05 Mar 2009 06:15:14 GMT

I totaly agree with you Andras and I am looking forward to see how this AXE .90 runs on water.

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (Andras) — Mon, 02 Mar 2009 10:45:14 GMT

Fredde Cederberg wrote:
I can't understand why the enginemanufacturers that makes new boat engines are making old style(OPS) or ugly(AXE Rossi) engines.

The OPS engine shown in Leno last summer is a joke, no manifold and no real carburettor, it was a new produce engine from the 70's.

AXE Rossi is a big factory but they clearly need to employ someone with skills for design because ths engine...

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (michael a lawson) — Sun, 01 Mar 2009 11:59:04 GMT

Hi everyone, I think it is a, 20 cc engine. strange

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (Fredde Cederberg) — Sun, 01 Mar 2009 11:47:09 GMT

That is the new .90 engine shown in Leno, but what's new with it? Still no real exhaust adapter and the valve on the carb is spinning and has no low speed needle.

Yes it is good with new engines on the market but why spend money to make an old engine, OPS must have a lot of guys to get feedback from so they could make a competitve engine for all boat categories, whit this engine I see only market for hydroracing nothing else.

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (BoBoKwok) — Sun, 01 Mar 2009 07:59:42 GMT

The flywheel part seems longer than CMB
It is wise to have the same bolting pattern as CMB
It is good to see new motor in the market anyway
OPS has new design 15cc although they are still producing the old one
I am not sure that it is a 90 or 80 anyway

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (Fredde Cederberg) — Sat, 28 Feb 2009 13:10:10 GMT

I can't understand why the enginemanufacturers that makes new boat engines are making old style(OPS) or ugly(AXE Rossi) engines.

The OPS engine shown in Leno last summer is a joke, no manifold and no real carburettor, it was a new produce engine from the 70's.

AXE Rossi is a big factory but they clearly need to employ someone with skills for design because ths engine looks like crap. The performence might be good, looks like Zimmerman intake but carb is missing...

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (HendricX) — Tue, 24 Feb 2009 11:47:43 GMT

How about the new OPS ?

In 15 and 20cc ...... almost direct replacement for K-engines.

(drill patern is 0,5 off)

Re: NEW AXE ROSSI .90-2009

feeds@yuku.com (Andras) — Tue, 24 Feb 2009 07:50:25 GMT

Hello Uros,
for the moment there's no engine data available, the info I have is:
- the engine will have the same mounting dimensions as the CMB,
- it will be available for sale in April.
If I have further info or any test results, I will let you know.
Regards,
Andras

NEW AXE ROSSI .90-2009

feeds@yuku.com (uros) — Mon, 23 Feb 2009 22:50:48 GMT

Hello,
I know almoust everybody drive CMB RS91 for FSR-V 15ccm. I saw on internet that new AXE ROSSI .90 comes out this month. Did anyone tested it or has any data for horsepower, rpm,... I hope there will be some other competative engines on market soon. It would be great to have some other serious supliers like CMB.