vertically or horizontally fixed rubber mounts

feeds@yuku.com (honzik6) — Thu, 10 May 2012 09:51:40 PST

Hi,

I was wondering what is a general opinion on the orientation of the engine/gearbox rubber mounts? I have always built my boats with horizontal orientation of the mounts (side mounted). In the new boat (Titan) they are oriented vertically and one would think that they wouldn't absorb the vibration properly - in fact, the overall operation of the boat feels a bit more noisy than my previous boats.

Thanks,

Jan

3.5 Fenix from Ian

feeds@yuku.com (Team Hof) — Thu, 03 May 2012 11:25:06 PST

For sale is a 3.5 Fenix boat from Ian.
The boat got a 2nd place at WC2006 in Norway and had been run for two seasons.
It has a Gear from H.Hass, original fuel Tanks from Ian and a Neussel Rudder.

also see this link:

Waterproof transmitter case

feeds@yuku.com (Phill Fields) — Sun, 29 Apr 2012 08:33:02 PST

After spending a very wet morning at the lake today have realised I could do with a good waterproof case for my Multiplex 3030. Anyone have any suggestions on what to try? Who uses what? (plastic bags and towels aside!).

Cheers

Phill

Information Re engine

feeds@yuku.com (mrosengines) — Sun, 01 Apr 2012 10:10:56 PST

I just had a thought what engine will be more competative in FRSV the CMB 21 VAC or OS 21XZ-M in the Ikarus Hull could the oSengien be used in racing?

RIP ... Nikolay Averianov

feeds@yuku.com (HendricX) — Thu, 29 Mar 2012 16:53:44 PST

Russian model engine builder Nikolay Averianov (A-45 , A90 engines) passed away on 27-03-2012

Our condolences to his wife and daughters.

Zen 8 !!!

feeds@yuku.com (KEITH BURGESS) — Wed, 28 Mar 2012 13:05:36 PST

I know this is not the place for advertising items but this I feel is more of a recomendation. I have just got my Zenoah back from Dave after having a 1mm stroker crank fitted and having his magical Dremmel do its best, what a difference !!! The engine was originally a Tuned Zen 7 and as it was in need of a rebuild I spoke to Dave and he recomended fitting the stroker crank as well, all I can say is money well spent. I ran it for the first time at Peterborough last weekend and as the results show I was now 1.5 seconds a lap faster than the rest of the field in my heat, this was unfortunatly short lived, 15 laps, due to a radio problem. Just shows how much power you can get out of a piston ported engine rather than the more expensive reed or disc valve engines. If you are thinking of buying or what more power out of a Zenoah ask Dave Marles about the new Zen 8 !!!

Keith.

Rc fuel in the uk.

feeds@yuku.com (HeeeKam) — Mon, 26 Mar 2012 05:19:25 PST

Hi everyone, As you all know it was the 1st race of 2012 yesturday and i wasnt there!! Ive been waiting over 4 weeks for my fuel order to arrive in my local shop, i have contacted the shop many times and there is still no sign of the fuel so i emailed the manufacture who emailed back implying that i was unreasonable expecting it any sooner! Ive built a 3.5 and a 15 yet unable to use them! Can someone please point me in a direction where i can purchase some good quality fuels please as i really would like to get involved in the racing action this year! Many thanks Rob.

Bad News about our friend Bobo, Kwok Ka Hung

feeds@yuku.com (Dave Marles) — Thu, 15 Mar 2012 00:11:49 PST

I am in deep shock, Bobo from Hong Kong, my personal friend of 25 years died yesterday.
Only yesterday he was asking information on here.
Such a genuine, honest friend to me for all these years, he had holidays here with me and my family and every World Championships was working at my caravan with his friends. I find it hard to comprehend that he is no more.
I am sure that many, many boating friends will echo my condolences to his family and friends.

Novarossi 21 Keep or Flash

feeds@yuku.com (Robert Mecdorf) — Wed, 14 Mar 2012 07:13:29 PST

Hello,

Have anybody test keep engine in FSR V? Is it a better than Flash? I wait for us opinion.

Robert

BBK software help

feeds@yuku.com (BoBoKwok) — Sat, 10 Mar 2012 23:54:48 PST

I have been fighting against the BBK software for quite a while.
I still do not know how to send boater into different heat.
There is no boating mode in the software, currently we are using 2wd mode for our 6 minute fast electric race.
Please give me a hand.

Wanted boat FSR o 3,5

feeds@yuku.com (Robert Mecdorf) — Sat, 18 Feb 2012 13:28:40 PST

Hi,

I want to buy used boat FSR O 3,5. Offer please send to my meassage box. or my email: mecdorf@onet.eu

regards

Robert

OS CARB 9B For sale

feeds@yuku.com (Bart Drieghe) — Tue, 31 Jan 2012 13:57:11 PST

Hello ,

I have a few( 3) OS 9B Carb's for sale , they have the improved mixing needle .
Price is 70 euro's , shipping not included . 1X shipping , even if you buy two or three .

Contact me on : bdrieghe (at) skynet ( dot ) be

Regards ,
Bart

Heatlist and timeschedule Int.Spaarnwoude Netherlands 26-27-28 May 2012

feeds@yuku.com (Marcel van Eerden) — Thu, 19 Jan 2012 11:20:12 PST

Hello Boaters,

Heatlist and timeschedule Int. Spaarnwoude ar online look at www.teammagic.nl

Kind Regards

Marcel van Eerden

EUROCUP 2012 in DUISBURG

feeds@yuku.com (ihshamminkeln) — Sun, 15 Jan 2012 02:28:47 PST

Dear boaters,

you can find all informations about our "International FSR-V" race on our website. Please have a look at www.FSR-V.de (menu EUROCUP 2012)!

Online regsitration is started - now

We have about 40 (1-2-3 beds | with or without breakfast) rooms for rent directly to the racing area. If anyone is interested please send an email to Dieter Krupkat mailto:essenkettwig2001@t-online.de and cc Daniel Kleff mailto:d.kleff@fsr-v.de !

cu all in Duisburg

Daniel Kleff
IHS Hamminkeln e.V.

26cc RCMK Rear exhaust engine c/w header and tuned pipe * REDUCED * Now £175 * * SOLD * *

feeds@yuku.com (cc0481) — Mon, 09 Jan 2012 13:27:13 PST

RCMK R254Evo with works tournament cylinder, header and stainless tuned pipe

Contact me for more information

£175

UP FOR SALE , COSTA 15 CC STEVEN KINDT SOLD SOLD SOLD SOLD

feeds@yuku.com (Bart Drieghe) — Sun, 08 Jan 2012 02:25:22 PST

Boat has been sold ,

Congratulations to the buyer , he will have a very nice boat !

Regards ,
Bart

Wanted : PMB CS-23 "old-style"

feeds@yuku.com (HendricX) — Tue, 03 Jan 2012 18:24:39 PST

I'm looking for a PMB CS-23 gaspipe ,

but not the one with the o-rings , old-style with watercooling and clamp-style header prefered. (CS-5 style)

3.5cc Icarus REDUCED Now £300

feeds@yuku.com (cc0481) — Mon, 02 Jan 2012 08:05:17 PST

PMB Icarus in epoxy c/w CMB VAC21 £300

Boat is complete including latest CMB VAC21. Engine has brand new VAC21 piston/liner and brass head button, 1.8L tank, pipe, all servo’s (Savox/HiTech), latest type PMB centre and turn tabs. Receiver and transponder are not included, just add these and you can go racing. Only used for 2011 season.

Boat is sold complete with spare piston/liner/rod

HAPPY NEW YEAR

feeds@yuku.com (SOLLING) — Sun, 01 Jan 2012 00:07:28 PST

HAPPY NEW YEAR to everyone and a special thanks to all of you who have sent me get well wishes and support throughout 2011

Have a happy and sucessful 2012

Steve ( dad ) Whenham

Delta Force 90 MKII

feeds@yuku.com (ian folkson) — Fri, 25 Nov 2011 04:19:07 PST

Sold

RC Racing Boats